100 Halloween Pumpkin Carving Ideas

Nothing says Halloween like a lineup of pumpkins with adorable (and sometimes spooky) faces glowing on your porch.

If you’re carving with kids or you want cleaner lines, use a pumpkin carving kit and a pumpkin scoop.

1. “Classic Cute Ghost” Peekaboo Face

A friendly ghost shape with a tiny smile and rounded eyes—more sweet than scary.

Supplies

• 1 medium carving pumpkin
• 1 pumpkin carving kit
• 1 pumpkin scoop
• 1 pumpkin stencil set (optional)
• 1 LED tea light

Directions

1. Cut a lid and scoop out the pumpkin using a pumpkin scoop. Scrape the wall to about 1 inch thick for cleaner cuts.
2. Draw a simple ghost silhouette on the front (rounded head, wavy bottom) and add two rounded eyes plus a tiny smile.
3. Use the small saw from your carving kit to cut out the ghost shape first, then the eyes and mouth.
4. Clean up edges with the detail tool for a smooth, “cute” look.
5. Place an LED tea light inside so it glows softly.

2. “Kawaii Pumpkin” Big Sparkle Eyes

Huge anime-style eyes with a tiny mouth—instant adorable porch pumpkin.

Supplies

• 1 round pumpkin
• 1 pumpkin carving kit
• 1 washable marker (for sketching)
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and thin the front wall slightly (this helps detailed eyes).
2. Draw two oversized oval eyes with two little “sparkle” circles inside each eye.
3. Cut out the eye shapes and the sparkle circles so light shines through in a cute pattern.
4. Add a tiny curved mouth (small cutout) below the eyes.
5. Light it from inside with an LED light for a bright, cartoon glow.

3. “Cat Whiskers” Sleepy Kitty Face

A calm cat face with sleepy eyes and whiskers—perfect for a cute Halloween vibe.

Supplies

• 1 tall pumpkin
• 1 pumpkin carving tools
• 1 poker tool (for whisker dots)
• 1 LED tea light

Directions

1. Draw two closed “sleepy” eyes as curved lines (like a gentle upside-down U).
2. Cut thin slits for the eyes (small cuts look cuter than huge holes here).
3. Cut a small triangle nose and a simple curved mouth.
4. Use the poker tool to make whisker dots, then carve light whisker lines outward.
5. Pop in an LED light so the whisker details still show.

4. “Boo Bat” Smiling Bat Wings

A bat with rounded wings and a cute little grin—friendly, not freaky.

Supplies

• 1 wide pumpkin
• 1 pumpkin stencil (bat shape)
• 1 carving kit
• 1 LED pumpkin light

Directions

1. Transfer a bat stencil or draw a bat with rounded “scallop” wings.
2. Cut out the bat silhouette and add two small eyes plus a tiny smile.
3. Keep the wing points rounded to maintain the cute look.
4. Scrape the inside front wall thinner behind the bat so it glows brighter.
5. Light with an LED pumpkin light.

5. “Candy Corn Cutie” Layered Triangle Face

A candy corn-inspired design using triangle layers and a sweet face.

Supplies

• 1 medium pumpkin
• 1 scraping tools
• 1 carving knife set
• 1 battery LED string lights

Directions

1. Draw a large candy corn triangle on the pumpkin front.
2. Instead of fully cutting everything out, scrape the top section lightly, the middle a bit deeper, and cut out only the bottom section for a glowing layered look.
3. Add two small circle eyes and a tiny smile in the middle section.
4. Clean edges so the triangle looks crisp and neat.
5. Use LED string lights inside for even glow.

6. “Mummy Wrap” Bandage Stripes

Carve staggered “wrap” gaps so the pumpkin looks like a mummy with peeking eyes.

Supplies

• 1 tall pumpkin
• 1 pumpkin saw
• 1 detail tools
• 1 LED tea lights

Directions

1. Sketch horizontal bandage strips across the pumpkin, leaving gaps between them.
2. Cut out the gaps so light shines through like “missing bandage” spaces.
3. Carve two oval eyes near the top (make them slightly uneven for character).
4. Use detail tools to round and smooth the strip edges.
5. Light with one or two LED tea lights depending on pumpkin size.

7. “Spider Web Heart” Cute Web + Tiny Spider

A web pattern inside a heart outline—sweet-and-spooky.

Supplies

• 1 smooth pumpkin
• 1 pumpkin pattern book (optional)
• 1 carving kit
• 1 LED puck light

Directions

1. Draw a large heart outline on the front.
2. Inside the heart, draw a simple web (curved arcs connected by radiating lines).
3. Cut out the web “gaps” but leave the web lines intact so it reads clearly.
4. Add a tiny spider silhouette hanging from one web line.
5. Use an LED puck light for bright definition.

8. “Witch Hat Smile” Happy Witch Face

A cute witch with a big hat outline and a small grin—Halloween classic but friendly.

Supplies

• 1 large large pumpkin
• 1 witch stencil
• 1 carving tools kit
• 1 LED string lights

Directions

1. Sketch a wide witch hat at the top of the face area.
2. Cut out the hat silhouette and keep the brim slightly curved for a whimsical look.
3. Add two round eyes and a small smile underneath.
4. Scrape a crescent moon into the hat (surface carving) for extra detail.
5. Light with LED string lights so the hat glows evenly.

9. “Pumpkin Patch Trio” Three Tiny Faces

Carve three mini jack-o’-lantern faces on one pumpkin like a little pumpkin family.

Supplies

• 1 very large extra-large pumpkin
• 1 detail tool set
• 1 scraper
• 1 LED pumpkin lights

Directions

1. Draw three small face circles spaced across the front (like a row of mini pumpkins).
2. Give each face a different cute expression: happy, surprised, sleepy.
3. Cut out eyes/mouths carefully with small tools to keep them delicate.
4. Thin the pumpkin wall behind each face area for brighter glow.
5. Use a bright LED light inside so all three faces show clearly.

10. “Friendly Frankenstein” Blocky Smile

A simplified Frankenstein face with squared eyes and a goofy grin—more cartoon than scary.

Supplies

• 1 tall tall pumpkin
• 1 carving tool kit
• 1 detail carving tools
• 1 LED puck light

Directions

1. Draw two squared eyes, a blocky stitched smile, and two small “bolt” circles on the sides.
2. Cut out the eyes and mouth, leaving thick lines so it reads clearly from far away.
3. Carve stitch marks by making tiny short cuts across the mouth line.
4. Clean edges so the geometry looks crisp.
5. Use an LED puck light for strong illumination.

11. “Moon & Stars” Cozy Night Sky

A sweet celestial pumpkin with a crescent moon and scattered star cutouts.

Supplies

• 1 smooth pumpkin
• 1 set star stencils
• 1 carving kit
• 1 LED string lights

Directions

1. Draw a large crescent moon on one side of the pumpkin.
2. Cut the crescent moon out, then add small star cutouts around it (vary sizes for a dreamy sky).
3. For extra depth, surface-carve a few “twinkle” lines around some stars.
4. Thin the pumpkin wall behind the stars for brighter points of light.
5. Fill with LED string lights for a starry glow.

12. “Pumpkin Latte” Coffee Cup Face

A cute coffee cup carved on your pumpkin with a little steam swirl—cozy fall vibes.

Supplies

• 1 large large pumpkin
• 1 scraper
• 1 detail tools
• 1 LED puck light

Directions

1. Draw a to-go coffee cup shape with a lid and a curved handle area.
2. Cut out the cup outline (or surface-carve it and cut out only the inside for glow contrast).
3. Add two cute eyes and a tiny smile on the “cup.”
4. Carve a simple steam swirl above the cup as thin cutouts.
5. Light from inside so the cup and steam glow like a cozy sign.

13. “Owl Eyes” Wide-Eyed Forest Owl

Big round owl eyes and feather marks—sweet woodland Halloween.

Supplies

• 1 round pumpkin
• 1 carving kit
• 1 fine carving tools (for feather texture)
• 1 LED tea light

Directions

1. Draw two huge circles for eyes, with smaller circles inside for pupils.
2. Cut out the eye circles and smaller pupil circles for a layered glowing look.
3. Add a small triangle beak between the eyes.
4. Surface-carve short feather lines around the face area for texture.
5. Light inside so the eyes glow bright.

14. “Smiling Skeleton” Simple Skull Face

A cute skull with rounded teeth—more playful than creepy.

Supplies

• 1 tall tall pumpkin
• 1 skull stencil
• 1 tools kit
• 1 LED light

Directions

1. Sketch a rounded skull shape with big cheek curves.
2. Cut out large eye sockets (keep them rounded, not sharp).
3. Cut a heart-ish nose triangle.
4. Carve a wide smile and cut little rounded rectangles for teeth.
5. Light it so the teeth detail shines through clearly.

15. “Winking Pumpkin” One Eye Closed

A playful jack-o’-lantern with one wink—simple, cute, and always gets compliments.

Supplies

• 1 medium pumpkin
• 1 carving tool kit
• 1 washable marker
• 1 LED tea light

Directions

1. Draw one round open eye and one curved closed eye (wink line).
2. Cut the open eye fully out; for the wink, cut a thin slit so it looks like a line.
3. Cut a wide smile with slightly rounded corners.
4. Add tiny cheek dimples as small surface-carved half-moons.
5. Light inside for a friendly porch glow.

16. “Candy Bucket” Trick-or-Treat Pail

A carved candy pail silhouette with little candy shapes “spilling” out.

Supplies

• 1 big carving pumpkin
• 1 stencil set (optional)
• 1 carving kit
• 1 LED puck light

Directions

1. Draw a candy bucket shape with a handle.
2. Cut out the bucket silhouette and then add small candy cutouts spilling to one side (wrapped candy ovals, lollipops).
3. Keep candy shapes rounded for a cute look.
4. Thin the inside wall behind the candy spill area for brighter details.
5. Light with an LED puck light to show all the little shapes.

17. “Boo Banner” Mini ‘BOO’ Letters

Carve “BOO” in bubbly letters with tiny star accents—simple but super festive.

Supplies

• 1 smooth pumpkin
• 1 letter stencils (optional)
• 1 carving tools
• 1 LED tea light

Directions

1. Draw “BOO” in chunky bubble letters.
2. Cut out the inner letter spaces and the outer outlines depending on how bold you want it.
3. Add tiny stars around the word (small cutouts or surface-carve star shapes).
4. Clean letter edges carefully so they look smooth and “cartoon-y.”
5. Light inside for a bright sign-style glow.

18. “Pumpkin Emoji” Heart Eyes

Carve a heart-eyes emoji face—cute and instantly recognizable.

Supplies

• 1 round round pumpkin
• 1 carving kit
• 1 washable marker
• 1 LED pumpkin light

Directions

1. Draw two heart shapes for eyes.
2. Cut out the hearts carefully (smooth curves matter here).
3. Carve a big open smile (rounded rectangle) or a curved grin.
4. Optional: surface-carve small cheek circles for extra cuteness.
5. Light inside so the heart eyes glow strong.

19. “Doodle Stars” Tiny Constellation Pumpkin

Lots of little star cutouts and dot “constellations” for a magical Halloween look.

Supplies

• 1 medium pumpkin
• 1 poker tool
• 1 small saw
• 1 LED string lights

Directions

1. Draw a scattering of stars across the pumpkin front (mix sizes).
2. Cut out a few larger stars with the saw.
3. Use the poker tool to punch tiny dot constellations around the bigger stars.
4. Thin the inside wall behind the star area for brighter points.
5. Light with string lights so the dots glow like a sky.

20. “Pumpkin Pup” Dog Face

A puppy face with floppy ears carved into the sides—so cute for kid-friendly Halloween.

Supplies

• 1 wide wide pumpkin
• 1 carving tools kit
• 1 scraper
• 1 LED puck light

Directions

1. Sketch a puppy face: two round eyes, a big oval nose, and a curved tongue-out smile.
2. Carve the eyes and mouth cutouts.
3. For ears: carve long ear shapes on each side of the pumpkin (surface-carve outline) or cut shallow ear shapes that don’t go all the way through for dimension.
4. Clean edges so the nose and tongue shapes stay rounded and friendly.
5. Light inside for a glowing pup face.

21. “Haunted House Cute” Tiny Windows

A little house silhouette with sweet rounded windows—spooky-cute cottage vibes.

Supplies

• 1 large pumpkin
• 1 haunted house stencil
• 1 carving kit
• 1 LED string lights

Directions

1. Draw a simple house silhouette (roof peak, chimney, rounded door).
2. Cut out the house shape and add tiny rounded windows (circles or soft squares).
3. Add a little crescent moon above the roof.
4. Thin the wall behind windows so they glow clearly.
5. Light with string lights for an even “house glow.”

22. “Bunny Vampire” Tiny Fangs

A bunny face with little vampire fangs—cute, silly, and unexpected.

Supplies

• 1 round pumpkin
• 1 detail tools
• 1 pumpkin saw
• 1 LED tea light

Directions

1. Draw a bunny face with big oval eyes and two tall ear outlines near the top.
2. Cut out the eyes and carve the ear outlines (either cut-through ears or surface-carve ears for a softer look).
3. Carve a small mouth with two tiny fang triangles peeking out.
4. Add little cheek dots with the poker tool if you want extra cute detail.
5. Light inside so the eyes and tiny fangs pop.

23. “Rainbow Sprinkle Smile” Confetti Cutouts

A happy face surrounded by little confetti holes that look like sprinkles when it glows.

Supplies

• 1 medium pumpkin
• 1 poker tool
• 1 carving kit
• 1 LED puck light

Directions

1. Carve a simple cute face (round eyes, curved smile) in the center.
2. Use the poker tool to punch lots of small holes around the face like confetti.
3. Vary spacing so it looks random and sprinkle-like.
4. Thin the inside wall behind the confetti area for brighter dots.
5. Light with a puck light so the “sprinkles” sparkle at night.

24. “Tiny Witchy Stars” Hat + Sparkles

A small witch hat with stars floating around it—simple and super cute.

Supplies

• 1 smooth smooth pumpkin
• 1 stencil set
• 1 tools kit
• 1 LED string lights

Directions

1. Draw a small witch hat silhouette on the front (tilted looks extra whimsical).
2. Cut out the hat, then add small star cutouts around it.
3. Surface-carve a few swirl lines for “magic sparkle trails.”
4. Clean edges so the stars stay crisp and cute.
5. Light with string lights to make the stars pop.

25. “Pumpkin Penguin” Cozy Scarf Face

A penguin face on your pumpkin with a carved scarf stripe—cute wintery twist for Halloween.

Supplies

• 1 tall tall pumpkin
• 1 detail tools
• 1 scraper
• 1 LED puck light

Directions

1. Draw two big oval penguin eyes and a small beak triangle between them.
2. Cut out the eyes and beak (keep the beak small and centered so it stays cute).
3. Carve a scarf band across the lower front by cutting thin horizontal gaps (like stripes).
4. Surface-carve little tassel lines on one end of the scarf for detail.
5. Light inside so the scarf stripes glow like a cozy accessory.

26. “Boo Bee” Striped Bumble-Boo

A cute bumblebee face with “BOO” wings—sweet, silly, and perfect for kids.

Supplies

• 1 medium carving pumpkin
• 1 pumpkin carving tools kit
• 1 pumpkin scoop
• 1 washable markers
• 1 LED pumpkin light

Directions

1. Cut a lid, then scoop seeds and stringy bits using a pumpkin scoop. Scrape the front wall to about 1 inch thick for cleaner carving.
2. With washable markers, draw two round eyes and a small smile in the center, then add two curved “stripe” bands across the pumpkin.
3. Use your carving tools to cut out the eyes and mouth.
4. Carve the stripe bands as long, thin cutouts (leave plenty of pumpkin between stripes so it stays sturdy).
5. On each side of the face, carve simple wing shapes and cut the letters “B-O-O” inside each wing for a punny glow.
6. Place an LED pumpkin light inside so the stripes and wings pop at night.

27. “Candy Wrapper Cutie” Bow-Tie Candy

A classic wrapped candy silhouette with a smiling face in the middle—simple and super on-theme.

Supplies

• 1 round round pumpkin
• 1 pumpkin carving knife set
• 1 detail carving tools
• 1 candy pumpkin stencil (optional)
• 1 LED puck light

Directions

1. Clean out your pumpkin (the small serrated saw in a knife set makes the lid easier to cut smoothly).
2. Draw a wrapped candy shape: a wide oval center with two “twist” triangles on each side.
3. Carve the candy outline as a big glowing shape, then add a tiny cute face inside the center oval.
4. Use detail tools to round the corners of the wrapper twists so it looks extra sweet.
5. Light from inside with an LED puck light to make the candy glow evenly.

28. “Little Boo Bouquet” Cluster of Tiny Ghosts

Several mini ghost cutouts grouped together like a floating ghost family.

Supplies

• 1 large large carving pumpkin
• 1 ghost stencil set (optional)
• 1 pumpkin carving tools kit
• 1 LED string lights

Directions

1. Scoop and scrape the inside, then decide where your cluster will go (center-front looks best).
2. Draw 5–8 tiny ghosts in different sizes—keep them rounded with wavy bottoms.
3. Carve each ghost silhouette using your carving tools, then add tiny dot eyes and little smiles on a few.
4. Leave small gaps between ghosts so the pumpkin stays sturdy.
5. Add a few tiny star cutouts around them for “floating magic.”
6. Use LED string lights inside so all the mini shapes glow evenly (one tea light won’t reach every ghost as well).

29. “Potion Label” ‘Brew’ Bubble Jar

A potion bottle with bubbly cutouts and a cute label—witchy but friendly.

Supplies

• 1 tall tall carving pumpkin
• 1 potion stencil (optional)
• 1 pumpkin carving tool kit
• 1 LED puck lights

Directions

1. Cut the lid and hollow the pumpkin out (scraping thinner behind the design makes potion bubbles glow brighter).
2. Draw a bottle shape with a cork top, then add bubble circles rising upward.
3. Carve the bottle outline as a big cutout and carve bubbles as small circles.
4. Inside the bottle area, carve a simple label that says “BREW” in chunky letters.
5. Place an LED puck light inside so the label and bubbles look crisp at night.

30. “Sweet Scarecrow” Button Nose Face

A cozy fall scarecrow face with patch stitches and a button nose—more autumn-cute than scary.

Supplies

• 1 medium pumpkin
• 1 detail carving tool
• 1 pumpkin carving kit
• 1 LED tea lights

Directions

1. Hollow out the pumpkin and scrape the front smooth for drawing.
2. Draw two round eyes and a big stitched smile (a curved line with short stitch marks across it).
3. Carve the eyes and mouth with your carving kit.
4. For the “button nose,” draw a circle with two tiny holes; cut out the circle, then poke the two holes with a detail tool so it looks like a button.
5. Add a little patch shape on one cheek and carve tiny stitch marks around it (surface-carving works great here).
6. Light with one or two LED tea lights for a warm glow.

31. “Boo Clouds” Ghost + Puffy Clouds

A floating ghost with cloud puffs around it—soft, dreamy Halloween.

Supplies

• 1 smooth carving pumpkin
• 1 ghost stencil (optional)
• 1 pumpkin carving tools
• 1 LED string lights

Directions

1. Scoop and scrape your pumpkin interior (aim for a slightly thinner wall where the clouds will be).
2. Draw one medium ghost in the center with a tiny smile.
3. Around it, draw 5–7 cloud puffs (rounded scallop shapes).
4. Carve the ghost fully through and carve the cloud puffs as shallow cutouts or surface-carve them for a softer “misty” look.
5. Use LED string lights inside so the whole scene glows evenly.

32. “Tiny Tombstones” Cute Graveyard Row

A row of rounded tombstones with sweet faces—spooky but still kid-friendly.

Supplies

• 1 wide wide pumpkin
• 1 graveyard stencil (optional)
• 1 tool kit
• 1 LED puck light

Directions

1. Clean out the pumpkin and flatten the front drawing area by scraping it smooth.
2. Draw 4–6 rounded tombstone shapes in a line along the bottom third of the pumpkin.
3. Carve each tombstone as a cutout window, then add a tiny cute face on one or two (dot eyes + small smile).
4. Carve simple letters like “BOO” or “EEK” on a couple tombstones using shallow cuts so they look like engraved stone.
5. Light with an LED puck light to show the whole row clearly.

33. “Jack-o’-Lantern Bow” Pumpkin Wearing a Bow

A classic cute face with a big bow carved above it—perfect for a sweeter Halloween porch.

Supplies

• 1 medium carving pumpkin
• 1 carving knife set
• 1 detail tools
• 1 LED tea lights

Directions

1. Hollow the pumpkin and scrape the inside of the front panel so it’s easier to cut smooth curves.
2. Draw a cute jack-o’-lantern face (round eyes, curved smile) and above it draw a big bow with two loops and ribbon tails.
3. Use the small saw from a knife set to cut out the bow shape carefully—smooth curves make it look “bow-like.”
4. Carve the face cutouts and lightly shave a few lines into the bow (surface-carving) for ribbon texture.
5. Place LED tea lights inside so both the bow and face glow.

34. “Spooky Boba” Bubble Tea Cup

A boba tea cup with tapioca “bubble” holes and a cute straw—Halloween café vibes.

Supplies

• 1 large pumpkin
• 1 detail tool
• 1 carving tools kit
• 1 LED puck lights

Directions

1. After scooping, use your detail tool to thin the wall behind where the “bubbles” will go (it helps those circles glow).
2. Draw a tall cup with a lid, a diagonal straw, and a cute face on the cup.
3. Cut out the cup outline (or cut out just the inside of the cup shape for a window effect).
4. Along the bottom of the cup, carve 8–12 small circles as boba pearls.
5. Add two round eyes and a tiny smile in the center of the cup.
6. Light with an LED puck light so every bubble shows.

35. “Pumpkin Panda” Round Ears + Cute Nose

A panda face carved into your pumpkin—sweet, cozy, and kid-approved.

Supplies

• 1 round carving pumpkin
• 1 panda stencil (optional)
• 1 pumpkin carving tools
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and scrape the face area smooth for drawing.
2. Draw two big oval eye patches, two round eyes inside them, and a small rounded triangle nose.
3. Carve the eye patches as larger openings, then carve the smaller eye circles inside for extra glow detail.
4. Carve two round ear shapes near the top sides (surface-carve outlines or do small cut-through ears if your pumpkin is sturdy).
5. Add a tiny curved mouth under the nose for a gentle expression.
6. Use an LED pumpkin light to make the panda features shine clearly.

36. “Jack’s Little Bowtie” Classic Face + Bowtie

A cute jack-o’-lantern face with a bowtie cutout underneath—simple, polished, and party-ready.

Supplies

• 1 medium pumpkin
• 1 carving knife set
• 1 scraper
• 1 LED tea light

Directions

1. Scoop out the pumpkin and scrape the inside so the front is evenly thick.
2. Carve a classic cute face: rounded triangle eyes and a smooth smile (keep corners rounded).
3. Below the mouth, draw a bowtie with two triangles and a small center circle.
4. Use a small saw from your knife set to cut the bowtie cleanly.
5. Light with an LED tea light so both the face and bowtie glow.

37. “Pumpkin Froggy” Lily Pad Smile

A frog face with big eyes and a simple lily pad cutout—cute pond vibes for Halloween.

Supplies

• 1 wide wide pumpkin
• 1 detail tools
• 1 tools kit
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape the wall thinner where the frog face will be.
2. Draw two big round eyes at the top with smaller pupil circles inside.
3. Cut out the eye circles and the pupil circles so they glow like “frog eye shine.”
4. Add a wide curved smile below.
5. Carve a lily pad shape off to one side as a simple extra cutout accent.
6. Light with an LED puck light so the eyes really pop.

38. “Cute Candy Skull” Sugar Skull-Inspired Face

A sweet “Day of the Dead” style skull with hearts and flowers—pretty, bright, and still Halloween-ready.

Supplies

• 1 large carving pumpkin
• 1 sugar skull stencil (optional)
• 1 pumpkin carving tools kit
• 1 fine carving tools
• 1 LED string lights

Directions

1. Clean out your pumpkin and scrape it thinner behind the design area for detailed glow.
2. Draw a rounded skull shape with heart eyes and a small nose.
3. Add small flower shapes on the forehead and cheek areas.
4. Use fine carving tools to carve petals as shallow cuts, and cut the heart eyes all the way through.
5. Carve a tidy tooth row (small rounded rectangles) so it stays cute, not spooky.
6. Use LED string lights to help the smaller details glow evenly.

39. “Boo Balloon” Floating Ghost Balloon

A ghost shaped like a balloon with a little “string” line—cute and quirky.

Supplies

• 1 medium pumpkin
• 1 pumpkin carving tools
• 1 detail tool
• 1 LED tea light

Directions

1. Scoop the pumpkin and scrape the wall behind the ghost area slightly thinner.
2. Draw a ghost with a round balloon-like body and a tiny knot at the bottom.
3. Carve the ghost shape all the way through, then carve two dot eyes and a tiny smile.
4. Use a detail tool to carve a thin wavy “string” line trailing downward (a thin cutout or surface-carve line both work).
5. Light with an LED tea light so the balloon ghost glows softly.

40. “Little Monster Scribble” Goofy Monster Face

A silly monster with mismatched eyes and a goofy tooth—fun and super kid-friendly.

Supplies

• 1 round pumpkin
• 1 pumpkin carving kit
• 1 washable markers
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and dry the outside so your markers draw smoothly.
2. Draw two different eyes (one big circle, one smaller oval), plus a wide lopsided grin.
3. Carve the eyes and mouth using your carving kit.
4. Add one oversized “tooth” by leaving a small rectangle of pumpkin inside the mouth opening.
5. Optional: surface-carve little “fur scribbles” around the face for texture.
6. Light with an LED light so the goofy expression shows clearly.

41. “Boo-tiful Butterfly” Bat-to-Butterfly Wings

A butterfly silhouette with bat-style scalloped wings—cute mashup for Halloween.

Supplies

• 1 wide pumpkin
• 1 butterfly pumpkin stencil (optional)
• 1 tools kit
• 1 LED puck lights

Directions

1. Scoop and scrape the inside, thinning behind the wing area for brighter glow.
2. Draw a butterfly with rounded wings, then add scalloped “bat” edges to the bottom of each wing.
3. Cut out the butterfly silhouette carefully with your carving tools.
4. Add tiny heart or star cutouts inside the wings like patterned spots.
5. Light with an LED puck light for crisp wing detail.

42. “Jack-o’-Lantern Bakery” Cupcake Pumpkin

A cupcake silhouette with a cute face and a frosting swirl top—sweet Halloween dessert vibes.

Supplies

• 1 large pumpkin
• 1 cupcake stencil (optional)
• 1 carving knife set
• 1 LED string lights

Directions

1. Hollow the pumpkin and scrape the wall thinner where the cupcake will be.
2. Draw a cupcake base with a swirly frosting top and a tiny “sprinkle” dot pattern.
3. Cut out the cupcake silhouette, then carve a cute face in the cupcake base area.
4. Use the fine saw in a knife set to create small sprinkle dots as tiny cutouts on the frosting swirl.
5. Add a small cherry circle on top as a cutout for extra glow.
6. Light with LED string lights so sprinkles show evenly.

43. “Peekaboo Kitty” Cat Behind a Corner

A cat paw and face peeking from the side—cute, clever, and looks amazing on a porch.

Supplies

• 1 tall pumpkin
• 1 detail tools
• 1 tools kit
• 1 LED puck light

Directions

1. Scoop out the pumpkin and decide which side your kitty will “peek” from.
2. Draw a vertical “edge” line like a wall corner.
3. On one side of that line, draw half a cat face (one eye, half a nose, half a smile) and a paw below.
4. Carve the eye and mouth cutouts; for the paw, carve toe bean cutouts as tiny ovals.
5. Use detail tools to smooth the curve of the cat cheek so it reads clearly.
6. Light with an LED puck light so the peekaboo effect stands out.

44. “Cute Candy Corn Friends” Trio of Tiny Candy Corns

Three candy corn shapes with mini faces—like a little candy corn friend group.

Supplies

• 1 large carving pumpkin
• 1 carving tools
• 1 washable marker
• 1 LED string lights

Directions

1. Scoop and scrape the pumpkin, thinning behind where your trio will go.
2. Draw three candy corn triangles in different sizes (tall, medium, tiny).
3. Carve each candy corn outline as a cutout and add tiny dot eyes and micro smiles on each one.
4. Surface-carve little “layer lines” on each candy corn to suggest the color bands.
5. Light with LED string lights so all three glow evenly.

45. “Sleepy Sloth” Hanging Halloween Sloth

A sloth face with closed eyes and a little branch—cozy, cute, and unique.

Supplies

• 1 round pumpkin
• 1 animal stencil set (optional)
• 1 detail tools
• 1 LED tea light

Directions

1. Hollow the pumpkin and scrape the wall behind the face area slightly thinner.
2. Draw a sloth face: two closed sleepy eyes (curved lines), a rounded nose, and a tiny smile.
3. Carve the eyes as thin slits and cut out the nose/mouth gently so it stays soft-looking.
4. Add a simple branch line across the lower area with two “arms” wrapping it (surface-carving works great for the branch texture).
5. Place an LED tea light inside for a calm glow.

46. “Pumpkin Pizza Slice” Spooky Slice

A pizza slice silhouette with “pepperoni” holes—fun for Halloween movie night.

Supplies

• 1 large pumpkin
• 1 carving knife set
• 1 detail tools
• 1 LED puck light

Directions

1. Clean out the pumpkin and dry the outside so your sketch doesn’t smear.
2. Draw a big pizza slice triangle with a crust curve at the top.
3. Cut out the pizza slice shape using a small saw from your knife set.
4. Carve several circles inside the slice as “pepperoni” holes.
5. Add a tiny cute face on one pepperoni or at the slice tip for a silly touch.
6. Light with an LED puck light so the circles glow like toppings.

47. “Boo Bookworm” Little Ghost Reading

A ghost holding a book—perfect if you want cute Halloween vibes with a cozy twist.

Supplies

• 1 medium pumpkin
• 1 ghost stencil (optional)
• 1 detail tool
• 1 LED tea lights

Directions

1. Scoop the pumpkin and scrape thinner behind the ghost/book area.
2. Draw a rounded ghost body with two little arms holding an open book.
3. Carve the ghost outline as a window, then carve the book pages as a smaller rectangle window in the arms.
4. Add dot eyes and a tiny smile on the ghost face using a detail tool.
5. Optional: surface-carve tiny page lines on the book for extra charm.
6. Light with LED tea lights to keep the glow soft and cozy.

48. “Trick-or-Treat Map” Haunted Route Dots

A dotted “map” path with little icons—like a Halloween scavenger map carved into a pumpkin.

Supplies

• 1 large carving pumpkin
• 1 poker tool
• 1 detail tools
• 1 LED string lights

Directions

1. Clean out the pumpkin and thin the wall a bit behind where the dotted path will go (dots glow best with a thinner wall).
2. Use a poker tool to punch a winding dotted path from one side of the pumpkin to the other.
3. Along the route, carve tiny icons: a candy, a ghost, a star, and a mini house silhouette.
4. Surface-carve a little arrow at the start and write “TRICK OR TREAT” in small shallow letters if you want.
5. Light with LED string lights so the dots glow evenly like a map trail.

49. “Little Witch Kitty” Cat + Hat Combo

A cat face wearing a tiny witch hat—cute, classic, and totally porch-perfect.

Supplies

• 1 medium pumpkin
• 1 tools kit
• 1 detail tool
• 1 LED pumpkin light

Directions

1. Scoop out the pumpkin and scrape the inside smooth where the design will be.
2. Draw a cat face: triangle ears, round eyes, a small nose, and whiskers.
3. Above the cat ears, draw a tiny tilted witch hat.
4. Carve the eyes and mouth cutouts, then carve the hat silhouette with clean edges using a tools kit.
5. Use a detail tool to add thin whisker lines and a small hat band stripe.
6. Light with an LED light to make the hat and face glow.

50. “Giggly Ghoul” Tongue-Out Ghost

A ghost with a tiny tongue-out expression—cute, goofy, and guaranteed to make people smile.

Supplies

• 1 medium pumpkin
• 1 pumpkin carving kit
• 1 pumpkin scoop
• 1 LED tea lights

Directions

1. Cut the lid and scoop everything out using a pumpkin scoop. Scrape the inside wall thinner behind the ghost area.
2. Draw a rounded ghost shape with a wavy bottom.
3. Carve the ghost silhouette as a large cutout window.
4. Add two oval eyes and a smiling mouth; leave a small pumpkin “tongue” shape inside the mouth by carving around it (so it looks like a tongue sticking out).
5. Clean edges with the small tools in your carving kit so the tongue detail looks neat.
6. Light inside with LED tea lights for a soft, friendly glow.

51. “Spooky Sprinkles” Donut Pumpkin

A big donut ring with sprinkle holes and a tiny bite mark—sweet, silly, and super Instagrammable.

Supplies

• 1 large carving pumpkin
• 1 pumpkin carving tools kit
• 1 pumpkin scoop
• 1 washable markers
• 1 LED puck light

Directions

1. Cut a lid and hollow the pumpkin with a pumpkin scoop. Scrape the front wall to about 1 inch thick so small “sprinkles” glow clearly.
2. Draw a large donut ring (big circle with a smaller circle hole). Add a small “bite” notch on one side.
3. Use your carving tools to cut out the donut hole and the bite notch.
4. Add sprinkle shapes (tiny skinny rectangles and ovals) around the donut ring and carve them as small cutouts.
5. Optional: surface-carve a frosting drip line along the top half of the donut for extra detail without weakening the pumpkin.
6. Light with an LED puck light so every sprinkle pops.

52. “Boo To-Go” Takeout Cup with Straw

A cute drink cup with a straw and “BOO!” label—perfect for Halloween movie night snacks.

Supplies

• 1 tall carving pumpkin
• 1 pumpkin carving knife set
• 1 detail tools
• 1 LED pumpkin light

Directions

1. Hollow the pumpkin and scrape the front panel thinner for cleaner label carving.
2. Draw a tall cup with a lid line and a diagonal straw coming out of the top.
3. Carve the cup outline as a big cutout window (or carve just the inside of the cup for a “glowing cup” look).
4. Add a small label rectangle on the cup and carve “BOO!” in chunky letters using detail tools.
5. Carve a few tiny ice-cube squares inside the cup as small cutouts for extra charm.
6. Place an LED light inside so the straw, cup, and label all glow evenly.

53. “Moonlight Moth” Friendly Moth Wings

A cute moth silhouette with patterned wings—spooky-cottagecore in pumpkin form.

Supplies

• 1 wide wide pumpkin
• 1 moth pumpkin stencil (optional)
• 1 pumpkin carving tools kit
• 1 fine carving tools
• 1 LED string lights

Directions

1. Clean out the pumpkin and thin the wall behind the wing area for brighter pattern glow.
2. Draw a moth with rounded wings and fluffy antennae.
3. Carve the moth outline carefully with your carving tools.
4. Add wing patterns (dots, hearts, little crescents) and carve them as small cutouts or shallow surface-carves.
5. Use fine tools for the tiny pattern marks so they stay neat.
6. Put LED string lights inside to make the wing details glow all over.

54. “Peekaboo Bat Squad” Bats Hiding in the Corner

Three bats peeking from one side like they’re sneaking into your porch party.

Supplies

• 1 medium carving pumpkin
• 1 bat stencil (optional)
• 1 detail carving tools
• 1 LED tea lights

Directions

1. Hollow the pumpkin and scrape the inside wall thinner behind the bat area.
2. Draw a vertical “edge” line like a wall corner near one side of the pumpkin.
3. On the inside of that edge, draw 3 bats stacked: one peeking at the top, one mid, one low.
4. Carve each bat silhouette as a cutout, leaving enough pumpkin between them so the panel stays strong.
5. Add tiny dot eyes to just one bat for a cute surprise detail.
6. Light with LED tea lights (two works great) so all three bats glow.

55. “Spiderweb Heart” Sweet Web Love

A heart-shaped web—cute, a little spooky, and surprisingly easy to carve neatly.

Supplies

• 1 smooth carving pumpkin
• 1 poker tool
• 1 detail tool
• 1 LED puck light

Directions

1. Clean out the pumpkin and scrape thinner behind the heart area.
2. Draw a large heart outline in the center.
3. Inside the heart, draw web lines: 4–6 curved “rings” and several spokes radiating from one top corner.
4. Use a poker tool to punch dot-holes along the web rings for a delicate lace look.
5. Carve the heart outline as a thin cutout border (or just carve small sections) so the web stays the star.
6. Light with an LED puck light to make the dotted web sparkle.

56. “Pumpkin Pup” Dog Face with Floppy Ears

A puppy portrait carved into a pumpkin—cute enough to make everyone stop and smile.

Supplies

• 1 large pumpkin
• 1 dog pumpkin stencil (optional)
• 1 fine carving tools
• 1 carving tools kit
• 1 LED string lights

Directions

1. Hollow the pumpkin and scrape the front wall thinner than usual (pet faces look best with surface-carving depth).
2. Sketch a simple dog face: two floppy ears, round eyes, a big nose, and a tiny tongue.
3. Use fine carving tools to surface-carve the ear areas and cheeks (shave the skin off to make lighter zones).
4. Carve the eyes as small cutouts and the nose as a slightly larger cutout for a glowing “snout.”
5. Add a tiny tongue by leaving a small pumpkin shape inside the mouth opening (carve around it so it stays attached).
6. Use LED string lights inside for even glow across the portrait.

57. “Witch Hat Stack” Three Tiny Hats

Three witch hats stacked like a cute totem—simple, graphic, and very Halloween.

Supplies

• 1 tall carving pumpkin
• 1 witch hat stencil (optional)
• 1 pumpkin carving tools
• 1 LED puck lights

Directions

1. Clean out the pumpkin and thin the wall behind where the hats will go.
2. Draw three witch hats stacked vertically (small top hat, medium, then large at the bottom).
3. Carve each hat silhouette as a cutout, keeping the brims thick so they don’t snap.
4. Add a buckle rectangle on each hat band using shallow carving for a crisp “belt” detail.
5. Optional: carve tiny stars around the hats to make it feel magical.
6. Light with LED puck lights so all three hats glow evenly.

58. “Crescent Cat” Moon + Sleeping Kitty

A curled-up cat sleeping on a crescent moon—cozy spooky-season perfection.

Supplies

• 1 smooth carving pumpkin
• 1 cat stencil (optional)
• 1 detail tools
• 1 LED string lights

Directions

1. Hollow the pumpkin and scrape thinner behind the moon curve so it glows cleanly.
2. Draw a large crescent moon and a curled cat silhouette resting on the lower curve.
3. Carve the moon as a cutout shape and carve the cat silhouette as a cutout sitting “on” the moon.
4. Add tiny star pinholes around the scene using a detail tool for sparkly night-sky vibes.
5. Optional: surface-carve whiskers and a tiny ear line so the cat reads clearly in daylight too.
6. Use LED string lights inside for an even, dreamy glow.

59. “Boo Basket” Trick-or-Treat Pail

A candy bucket silhouette with a cute ghost peeking out—so on-theme for Halloween night.

Supplies

• 1 large carving pumpkin
• 1 carving knife set
• 1 detail tools
• 1 LED puck light

Directions

1. Clean out the pumpkin and scrape the wall behind the bucket area thinner for a crisp silhouette.
2. Draw a rounded bucket shape with a handle arch above it.
3. Inside the bucket, draw a small ghost popping out (just head + wavy arms).
4. Carve the bucket opening and ghost shape as cutouts, leaving the handle as surface-carved lines (handles break easily if cut through).
5. Add a tiny candy cutout (like a wrapped candy) next to the ghost for extra detail.
6. Light with an LED puck light so the bucket scene glows evenly.

60. “Pumpkin Planet” Saturn Ring + Stars

A cute planet with a ring and tiny star dots—spacey, simple, and very kid-friendly.

Supplies

• 1 smooth carving pumpkin
• 1 poker tool
• 1 carving tools kit
• 1 LED tea lights

Directions

1. Hollow the pumpkin and scrape thinner behind the planet design area.
2. Draw a large circle planet and a wide ring oval crossing in front and behind it.
3. Carve the ring as two curved cutout strips (leave thick pumpkin bridges so it doesn’t collapse).
4. Carve a few crater circles on the planet as shallow surface-carves for texture.
5. Use a poker tool to dot tiny star holes around the planet.
6. Light with LED tea lights so the ring and stars glow softly.

61. “Gummy Worm Wiggle” Worm Trail Pumpkin

A wiggly worm path with tiny “dirt” dots—cute, gross-out fun in the best way.

Supplies

• 1 medium pumpkin
• 1 poker tool
• 1 detail tool
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and scrape thinner behind where the worm will squiggle.
2. Draw a long wavy worm line that loops around the pumpkin front.
3. Turn the worm into a cutout “track” by carving a thin channel along both sides of the line (leave the center strip intact so it looks like a raised worm).
4. Add a tiny worm face at one end (two dot eyes and a smile) with a detail tool.
5. Use a poker tool to add “dirt dots” around the trail.
6. Light with an LED light to make the worm path glow.

62. “Haunted Mail” Spooky Envelope

An envelope with a little ghost “letter” peeking out—cute for Halloween party invites!

Supplies

• 1 large pumpkin
• 1 carving knife set
• 1 detail tools
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape the wall thinner behind your envelope drawing area.
2. Draw a rectangle envelope with a triangle flap.
3. Inside the top of the envelope, draw a little ghost shape peeking out like a letter.
4. Carve the envelope outline as a cutout window, then carve the ghost as a smaller cutout inside it.
5. Use detail tools to carve a tiny “BOO” stamp square in one corner (shallow carve the border, cut out the letters).
6. Light with an LED puck light so the envelope scene glows evenly.

63. “Candle Cozy” Dripping Candle Pumpkin

A tall candle silhouette with wax drips—classic Halloween ambience but still cute.

Supplies

• 1 tall pumpkin
• 1 tools kit
• 1 detail tool
• 1 flickering LED tea lights

Directions

1. Hollow the pumpkin and scrape the area behind the candle thinner for a bright glow.
2. Draw a tall candle with a flame at the top and several wax drips down the sides.
3. Carve the flame as a small cutout and carve the candle body outline as a larger cutout.
4. For the wax drips, carve long teardrop shapes that hang down from the top edge of the candle.
5. Use a detail tool to smooth drip edges so they look “melty,” not jagged.
6. Place flickering LED tea lights inside for a cozy candle-like effect.

64. “Boo Buttons” Polka-Dot Ghost

A ghost silhouette filled with playful polka dots—simple, cute, and glows beautifully.

Supplies

• 1 medium pumpkin
• 1 poker tool
• 1 carving tools kit
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and scrape thinner behind the ghost area.
2. Draw a medium ghost shape with a rounded top and wavy bottom.
3. Instead of carving the whole ghost out, use a poker tool to punch polka-dot holes inside the ghost shape.
4. Carve only the ghost outline as a thin border (or leave it uncut and just use the dots—both look adorable).
5. Add two tiny eyes and a smile with a few extra dot holes near the top.
6. Light with an LED light so the dots shine like buttons.

65. “Spooky Sundae” Ice Cream Cone

An ice cream scoop with drips and a cone—dessert-themed Halloween that’s cute, not creepy.

Supplies

• 1 large carving pumpkin
• 1 ice cream stencil (optional)
• 1 carving knife set
• 1 detail tools
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape thinner behind the cone design.
2. Draw a cone triangle, then a big scoop on top with dripping lines.
3. Carve the scoop outline and drip shapes as cutouts; carve the cone outline as a cutout too.
4. Use detail tools to surface-carve crisscross “waffle” lines on the cone.
5. Add a tiny cherry circle on top as a cutout and a cute face on the scoop if you want extra sweetness.
6. Light with an LED puck light for a bright, even glow.

66. “Boo Rainbow” Arched Rainbow with Stars

A rainbow arc with tiny stars—happy Halloween vibes without being scary.

Supplies

• 1 wide wide pumpkin
• 1 poker tool
• 1 tools kit
• 1 LED string lights

Directions

1. Hollow and scrape the pumpkin, thinning behind the rainbow area.
2. Draw a rainbow arch with 4–5 band lines.
3. Carve the band lines as thin cutout stripes (leave thick bridges so the arch stays sturdy).
4. Use a poker tool to add tiny star dots around the rainbow for sparkle.
5. Optional: carve a tiny “BOO!” under the arch in shallow lettering.
6. Light with LED string lights so the whole arch glows evenly.

67. “Monster Marshmallow” Puffy One-Eye Monster

A marshmallow-shaped monster with one big eye—silly, sweet, and kid-approved.

Supplies

• 1 medium pumpkin
• 1 pumpkin carving tools
• 1 detail tool
• 1 LED tea lights

Directions

1. Clean out the pumpkin and scrape thinner behind the monster area.
2. Draw a rounded “marshmallow blob” body with a small bite notch on the top corner.
3. Carve one large circular eye cutout in the center and a tiny smile underneath.
4. Add two tiny horn nubs on top (keep them small so they don’t weaken the design).
5. Use a detail tool to smooth the blob edges so it looks puffy and cute.
6. Light with LED tea lights for a soft glow.

68. “Broom Zoom” Witch on a Broom

A tiny witch flying across the pumpkin—classic Halloween with a cute silhouette twist.

Supplies

• 1 large carving pumpkin
• 1 witch stencil (optional)
• 1 carving knife set
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape thinner behind the flight path area.
2. Draw a small witch silhouette (pointy hat, cape) sitting on a broom.
3. Carve the witch and broom as a single connected cutout so it doesn’t snap (leave thicker lines for the broom handle).
4. Add 3–5 tiny star cutouts trailing behind her like magical sparkles.
5. Optional: carve a small crescent moon in the corner to complete the sky scene.
6. Light with an LED puck light so the silhouette is sharp.

69. “Friendly Frank” Smiling Frankenstein Face

A cute Frankenstein with rounded bolts—more silly than spooky.

Supplies

• 1 tall pumpkin
• 1 Frankenstein stencil (optional)
• 1 detail tools
• 1 tools kit
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and scrape the front wall thinner behind the face area.
2. Draw a square-ish head top line, two round eyes, a stitched smile, and two side bolts (simple circles).
3. Carve the eyes as cutouts and carve the mouth as a curved cutout, leaving small stitch marks as bridges.
4. Carve the bolt circles on each side as small cutouts (keep them small so the side wall stays strong).
5. Use detail tools to add a cute scar line and a few tiny stitch marks across it.
6. Light with an LED light for a crisp face glow.

70. “Spooky Snow Globe” Ghost in a Globe

A round snow-globe window with a ghost and “sparkle” dots—cute, magical, and unique.

Supplies

• 1 large pumpkin
• 1 poker tool
• 1 carving knife set
• 1 LED string lights

Directions

1. Hollow the pumpkin and scrape thinner behind the globe area for bright, even light.
2. Draw a big circle for the globe and a small base rectangle underneath.
3. Inside the globe, draw a small ghost with a smile and tiny arms.
4. Carve the globe circle as a large window cutout; carve the ghost as a smaller cutout inside.
5. Use a poker tool to dot “snow/sparkles” around the ghost.
6. Light with LED string lights so the whole globe looks magical.

71. “Candy Corn Cutie” Smiling Candy Corn Stack

A big candy corn with a tiny face and two mini candy corns beside it—sweet, simple, and super kid-friendly.

Supplies

• 1 medium carving pumpkin
• 1 pumpkin carving tools kit
• 1 pumpkin scoop
• 1 washable markers
• 1 LED puck light

Directions

1. Cut a lid, hollow the pumpkin, and scrape the front wall thinner using a pumpkin scoop so the candy corn edges glow crisp.
2. Draw one large candy corn triangle in the center and two smaller candy corns near the bottom corners.
3. Carve the outlines of each candy corn as cutouts (keep the triangles chunky so they don’t crack).
4. Add a tiny face to the big candy corn—two dot eyes and a curved smile—and carve them out carefully.
5. Optional: surface-carve a thin line across each candy corn to suggest the three color bands without weakening the design.
6. Light with an LED puck light for a bright candy-style glow.

72. “Ghosty Book Club” Open Book + Boo

A storybook pumpkin with a little ghost rising out—perfect for cozy fall readers.

Supplies

• 1 large carving pumpkin
• 1 pumpkin carving knife set
• 1 detail tools
• 1 LED string lights

Directions

1. Hollow the pumpkin and scrape thinner behind the “pages” area so fine lines show up when lit.
2. Draw an open book: a rounded rectangle with a center spine line and two curved page edges.
3. Draw a small ghost floating up from the center seam like it’s popping out of the story.
4. Carve the book outline as a cutout window, then carve the ghost as a cutout inside the book.
5. Use detail tools to surface-carve a few thin “page lines” and a tiny “BOO!” on one page.
6. Light with LED string lights so the book looks warmly lit like a cozy lamp.

73. “Pumpkin Patch Postcard” Stamp + Little Pumpkin

A postcard-style design with a stamp corner and a cute pumpkin doodle—simple but unique.

Supplies

• 1 smooth carving pumpkin
• 1 poker tool
• 1 detail tool
• 1 LED tea lights

Directions

1. Clean out the pumpkin and scrape the wall thinner behind the postcard area.
2. Draw a big rectangle postcard with a small stamp square in the top right corner.
3. Inside the stamp square, draw a tiny pumpkin icon with a stem and carve it out.
4. Use a poker tool to poke a dotted “stamp edge” border around the stamp square.
5. Surface-carve a few “address lines” on the right and a short message like “Happy Haunting!” on the left using a detail tool.
6. Light with LED tea lights for a soft postcard glow.

74. “Skele-SELFIE” Skull with a Peace Sign

A cute skull holding up a peace sign—playful, trendy, and not too scary.

Supplies

• 1 large pumpkin
• 1 carving tools kit
• 1 detail tools
• 1 LED puck lights

Directions

1. Hollow the pumpkin and scrape the wall thinner behind the skull area so the face reads clearly at night.
2. Draw a rounded skull head with two big eye sockets, a small nose triangle, and a simple grin.
3. On one side, draw a cartoon hand making a peace sign (two fingers up) like it’s taking a selfie.
4. Carve the eyes and nose as cutouts; carve the mouth as a thin cutout grin with a few tooth gaps.
5. Carve the peace sign as a connected cutout with thicker “finger” lines so it won’t snap.
6. Light with LED puck lights so the skull and hand pop.

75. “Boo Berry Basket” Strawberry + Ghost Combo

A little berry with a boo face—cute, punny, and perfect for kid-friendly carving.

Supplies

• 1 medium pumpkin
• 1 detail tools
• 1 poker tool
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and scrape thinner behind the berry design area.
2. Draw a strawberry shape with a leafy top, but make the strawberry body look like a little ghost (wavy bottom edge).
3. Use a poker tool to poke “seed dots” across the berry/ghost body.
4. Carve two dot eyes and a tiny smile for the boo face.
5. Surface-carve the leafy top so it looks like a cap without cutting it fully out.
6. Light with an LED light so the seed dots twinkle.

76. “Little Boo-tique” Shopping Bag Ghost

A ghost holding a tiny shopping bag—cute for a “boo basket” theme or Halloween party decor.

Supplies

• 1 large carving pumpkin
• 1 carving knife set
• 1 detail tool
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape thinner behind where the ghost will be.
2. Draw a simple ghost with rounded arms, and add a small shopping bag hanging from one arm.
3. Carve the ghost silhouette as a cutout (keep the wavy bottom thick for strength).
4. Carve the bag as a cutout, but leave the handle as a surface-carved line so it doesn’t break.
5. Add a tiny heart or “BOO” on the bag with a detail tool.
6. Light with an LED puck light for a bright boutique glow.

77. “Potion Label Party” Three Bottles

Three potion bottles labeled “BOO,” “Eek,” and “Yum”—cute and very Halloween-party.

Supplies

• 1 wide wide pumpkin
• 1 detail tools
• 1 tools kit
• 1 LED string lights

Directions

1. Clean out the pumpkin and scrape thinner behind the bottle area for crisp label glow.
2. Draw three different bottle shapes (round flask, tall bottle, short jar) in a row.
3. Add a label rectangle on each bottle and write “BOO,” “EEK,” and “YUM.”
4. Carve the bottle outlines as cutouts and carve the label words as cutouts inside the labels.
5. Surface-carve little bubbles floating above one bottle for a fun “fizz” effect.
6. Light with LED string lights so all three potions glow evenly.

78. “Pumpkin Pal” Smiley Jack-o’-Lantern on a Pumpkin

A pumpkin carved on a pumpkin—cute, meta, and perfect for a front porch laugh.

Supplies

• 1 large pumpkin
• 1 carving knife set
• 1 washable markers
• 1 LED tea lights

Directions

1. Hollow the pumpkin and scrape thinner behind your “pumpkin drawing” area.
2. Draw a smaller pumpkin shape in the center (with ribs and a stem) and add a cute jack-o’-lantern face on that pumpkin.
3. Carve the small pumpkin outline as a cutout window.
4. Carve the tiny face (eyes + smile) as small cutouts inside the smaller pumpkin.
5. Surface-carve rib lines and a little stem to make the tiny pumpkin read clearly in daylight.
6. Light with LED tea lights for a warm, classic glow.

79. “Spooky Checklist” To-Do List Pumpkin

A cute checklist with little checkmarks: “Candy,” “Costume,” “BOO!”—perfect for back-to-school style but Halloween.

Supplies

• 1 smooth carving pumpkin
• 1 detail tools
• 1 poker tool
• 1 LED puck light

Directions

1. Clean out the pumpkin and scrape thinner behind the list area so letters glow.
2. Draw a clipboard top (a small clip shape) and 3–4 list lines beneath.
3. Write short items: “Candy,” “Costume,” “Spooky Movie,” and “BOO!”
4. Use detail tools to carve the words as simple cutouts (chunky lettering is easiest to read).
5. Add checkboxes and checkmarks using a poker tool (tiny holes make clean marks).
6. Light with an LED puck light so the checklist glows like a spooky sign.

80. “Boo Balloon” Ghost Holding a Balloon

A tiny ghost holding a balloon string—simple lines, maximum cute.

Supplies

• 1 medium carving pumpkin
• 1 carving knife set
• 1 detail tool
• 1 LED pumpkin light

Directions

1. Hollow the pumpkin and scrape thinner behind the ghost and balloon area.
2. Draw a small ghost on one side and a round balloon up above it.
3. Draw a thin balloon string connecting them (keep it thicker than you think so it won’t break).
4. Carve the ghost and balloon as cutouts. For the string, either surface-carve it (safest) or carve a thicker cutout line.
5. Add a tiny smile and blush dots on the ghost with your detail tool (small holes work great for blush).
6. Light with an LED light so the balloon looks like it’s floating.

81. “Haunted House Hello” Cute Cottage with Heart Window

A friendly little haunted house with a heart-shaped window—spooky, sweet, and totally porch-photo worthy.

Supplies

• 1 large carving pumpkin
• 1 pumpkin carving tools kit
• 1 detail tools
• 1 washable markers
• 1 LED puck light

Directions

1. Cut the lid, scoop out the pumpkin, and scrape the front wall thinner with your carving tools so the house details glow.
2. Draw a simple house silhouette (triangle roof + rectangle body) with a slightly crooked chimney for charm.
3. Add two window squares and one heart-shaped window in the center (make the heart a little bigger so it reads from far away).
4. Carve the house outline as a cutout. Carve the windows as cutouts too.
5. Use detail tools to surface-carve roof shingles and tiny dots along the pathway like stepping stones.
6. Light with an LED puck light for a bright “cozy haunted cottage” glow.

82. “Witch Hat Wardrobe” Hat + Bow Tie

A witch hat with a cute little bow tie underneath—more “Halloween outfit” than scary witch.

Supplies

• 1 medium carving pumpkin
• 1 pumpkin carving knife set
• 1 detail tool
• 1 LED tea lights

Directions

1. Clean out the pumpkin and scrape thinner behind the hat area so the brim looks crisp.
2. Draw a classic witch hat: tall triangle top with a wide curved brim (add a little tilt for cuteness).
3. Below the brim, draw a small bow tie shape (two triangles with a tiny center knot).
4. Carve the hat outline as a cutout. For extra dimension, surface-carve a band line across the hat.
5. Carve the bow tie as a cutout, but keep the knot thick so it stays connected.
6. Pop in LED tea lights so the hat looks like it’s glowing from inside a costume closet.

83. “Meowgical Moon” Cat on a Crescent

A simple silhouette of a cat sitting on a crescent moon—classic Halloween, but still sweet and cute.

Supplies

• 1 tall carving pumpkin
• 1 tools kit
• 1 poker tool
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape thinner behind the moon curve so it glows evenly.
2. Draw a large crescent moon off-center (bigger than you think—thin crescents can disappear from far away).
3. On the lower inside curve, draw a sitting cat with a curly tail and pointy ears.
4. Carve the moon as a cutout. Carve the cat as a cutout sitting “inside” the moon space.
5. Add tiny stars with a poker tool (small holes look magical and don’t weaken the pumpkin much).
6. Light with an LED puck light for a bright moonlit look.

84. “Spiderweb Sundae” Web + Cherry on Top

A spiderweb that ends in a cute little cherry—because Halloween can be sweet too.

Supplies

• 1 medium pumpkin
• 1 detail tools
• 1 poker tool
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and scrape thinner behind the web so the lines glow clearly.
2. Draw a classic web (center point + spokes + curved rings), but leave space at the bottom for a cherry.
3. At the bottom center, draw a small circle cherry and two curved stems looping upward.
4. Use detail tools to surface-carve the web lines (surface carving keeps the pumpkin sturdy).
5. Carve the cherry circle as a small cutout and carve the stem lines as shallow grooves.
6. Light with an LED light so the cherry glows like a little candy dot.

85. “Trick-or-Treat Tote” Candy Bag with Handles

A cute candy tote with little candy shapes peeking out—adorable for kid-friendly porch decor.

Supplies

• 1 large carving pumpkin
• 1 knife set
• 1 detail tools
• 1 LED string lights

Directions

1. Hollow the pumpkin and scrape thinner behind the bag area for strong glow.
2. Draw a simple tote bag: rounded rectangle body and two handle loops on top.
3. At the top opening, draw 3–4 candy shapes (wrapped candy ovals + a lollipop circle).
4. Carve the bag body as a cutout, but surface-carve the handles (cutout handles can break easily).
5. Carve the candy shapes as small cutouts peeking out from the opening.
6. Light with LED string lights so the tote glows like it’s overflowing.

86. “Bat Bow Party” Two Bats with a Bow

Two tiny bats tied together with a cute bow—like Halloween hair accessories, but carved.

Supplies

• 1 medium carving pumpkin
• 1 tools kit
• 1 detail tool
• 1 LED tea lights

Directions

1. Clean out the pumpkin and scrape thinner behind where the bats will sit.
2. Draw two small bat silhouettes facing each other (rounded wings look cuter than sharp points).
3. Between them, draw a bow with a knot and two loops.
4. Carve the bats as cutouts. Carve the bow as a cutout too, but keep the knot thicker than the loops.
5. Use a detail tool to add tiny smile marks or dot eyes to the bats for a friendly look.
6. Light with LED tea lights so the bow pops in the center.

87. “Mummy Mail” Envelope Wrapped in Bandages

A little envelope with mummy wrap lines—cute for classroom parties or Halloween “notes.”

Supplies

• 1 smooth carving pumpkin
• 1 detail tools
• 1 washable markers
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape thinner behind the envelope so lines show.
2. Draw an envelope: rectangle with a triangle flap line.
3. Across the envelope, draw diagonal “mummy wrap” stripes (overlapping bands look cutest).
4. Carve the envelope outline as a cutout window (or keep it surface-carved if you want extra sturdy).
5. Use detail tools to surface-carve the wrap stripes so they glow as lighter lines when lit.
6. Light with an LED puck light for a “glowing mail” effect.

88. “Candy Wrapper Squad” Three Wrapped Candies

Three adorable wrapped candy icons in a row—classic, simple, and never goes out of style.

Supplies

• 1 wide pumpkin
• 1 knife set
• 1 stencil paper (optional for drawing)
• 1 LED string lights

Directions

1. Scoop out the pumpkin and scrape thinner behind the candy row so each one glows evenly.
2. Draw three wrapped candies: oval center with triangle “twist” ends (make each candy slightly different for variety).
3. Carve each candy center as a cutout oval.
4. Carve the twist ends as cutouts, but keep the narrow points thicker so they don’t snap.
5. Add surface-carved stripes or polka dots on each candy for “wrapper patterns.”
6. Light with LED string lights so the whole candy lineup looks like a glowing candy bar sign.

89. “Pumpkin Pie Face” Slice with a Smile

A smiling pie slice with whip cream—fall-meets-Halloween and super wholesome.

Supplies

• 1 medium pumpkin
• 1 detail tool
• 1 tools kit
• 1 LED tea lights

Directions

1. Hollow the pumpkin and scrape thinner behind the pie slice area for a clean glow.
2. Draw a pie slice triangle with a crust edge along the top and a dollop of whipped cream on the point.
3. Add a tiny cute face on the slice (two dot eyes and a small smile).
4. Carve the pie slice outline as a cutout and carve the whipped cream dollop as a cutout too.
5. Use a detail tool to surface-carve crust texture lines so it looks baked and cozy.
6. Light with LED tea lights for a warm “pie shop window” vibe.

90. “Spooky Snowglobe” Mini Scene in a Dome

A snowglobe outline with a tiny ghost and stars inside—cute, different, and very craft-y.

Supplies

• 1 large carving pumpkin
• 1 detail tools
• 1 poker tool
• 1 LED puck light

Directions

1. Clean out the pumpkin and scrape thinner behind the globe area.
2. Draw a snowglobe: big circle dome on top with a short base rectangle underneath.
3. Inside the dome, draw a tiny ghost and 5–10 little stars/dots “floating” around it.
4. Carve the dome outline as a cutout window and carve the ghost as a cutout inside.
5. Use a poker tool to poke star holes—this makes them look like sparkly snowglobe glitter when lit.
6. Light with an LED puck light so the scene glows like a real globe.

91. “Boo Crew Bus” Cute School Bus with Ghosts

A little bus with tiny ghost passengers—playful, unique, and super cute for families.

Supplies

• 1 wide pumpkin
• 1 knife set
• 1 detail tools
• 1 LED string lights

Directions

1. Hollow the pumpkin and scrape thinner behind the bus shape so the windows glow clearly.
2. Draw a simple bus rectangle with rounded corners, two wheels, and 3–4 windows.
3. In each window, draw a tiny ghost face (two eyes + a little smile).
4. Carve the bus outline as a cutout window. Carve the windows as cutouts too.
5. For the wheels, carve simple circle cutouts or surface-carve them for extra strength.
6. Light with LED string lights so the whole “Boo Crew” ride glows evenly.

92. “Friendly Franken” Heart Cheeks Monster

A Frankenstein-style face with little heart cheeks—more cute monster than scary monster.

Supplies

• 1 large pumpkin
• 1 tools kit
• 1 detail tool
• 1 LED puck light

Directions

1. Clean out the pumpkin and scrape thinner behind the face area for brighter features.
2. Draw a square-ish Frankenstein head with a flat top and two little “bolt” rectangles on the sides.
3. Add big rounded eyes, a tiny stitched smile, and two small hearts as cheek blush.
4. Carve the eyes as cutouts and carve the hearts as small cutouts.
5. Use your detail tool to surface-carve stitch lines on the mouth and a few “scar” dashes on the forehead.
6. Light with an LED puck light so the hearts glow like rosy cheeks.

93. “Broom Zoom” Witch Hat + Speed Lines

A witch hat with fun motion lines like it’s zooming through the sky—simple, but extra dynamic.

Supplies

• 1 medium pumpkin
• 1 knife set
• 1 detail tools
• 1 LED tea lights

Directions

1. Hollow the pumpkin and scrape thinner behind the hat area.
2. Draw a witch hat tilted to the right, then add 5–7 “speed lines” trailing behind it.
3. Carve the hat as a cutout. Keep the brim thick so it doesn’t crack.
4. Surface-carve the speed lines with detail tools so they glow softly without weakening the pumpkin.
5. Add a tiny star cutout at the front of the hat like it’s leading the way.
6. Light with LED tea lights for a cute “zooming” effect.

94. “Moon Phase Minis” Three Little Moons

Three moon phases (crescent, half, full) in a row—simple, trendy, and looks so cute at night.

Supplies

• 1 wide pumpkin
• 1 tools kit
• 1 poker tool
• 1 LED string lights

Directions

1. Clean out the pumpkin and scrape thinner behind the moon row for even light.
2. Draw three circles across the pumpkin: one crescent, one half moon, one full moon.
3. Carve the crescent as a cutout shape (leave a thicker outline so it holds).
4. Carve the half moon as a half-circle cutout.
5. For the full moon, use a poker tool to poke tiny crater dots across it instead of cutting it out fully.
6. Light with LED string lights so the phases glow like a little moon banner.

95. “Trick-or-Treat Map” Dotted Path + Candy X

A little dotted map path leading to an X over a candy—like a Halloween treasure hunt.

Supplies

• 1 large carving pumpkin
• 1 poker tool
• 1 detail tools
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape thinner behind the map design for bright dots.
2. Draw a winding path across the pumpkin (like a maze line) ending at a wrapped candy icon.
3. Above the candy, draw a bold “X” like a treasure spot.
4. Use a poker tool to poke the entire path as dotted holes (this looks amazing when lit).
5. Carve the candy and the X as small cutouts so they glow brighter than the dotted trail.
6. Light with an LED puck light so the dotted “map” shines clearly at night.

96. “Boo Bubble Tea” Cup + Tapioca Dots

A bubble tea cup with a tiny ghost inside and boba dots—cute, modern, and super fun.

Supplies

• 1 medium pumpkin
• 1 detail tools
• 1 poker tool
• 1 LED pumpkin light

Directions

1. Clean out the pumpkin and scrape thinner behind the cup so the design glows evenly.
2. Draw a bubble tea cup: tall cup shape, domed lid, and a thick straw.
3. Inside the cup, draw a tiny ghost floating above the “boba” area.
4. Use a poker tool to poke 10–20 boba dots near the bottom of the cup.
5. Carve the ghost eyes and smile as tiny cutouts, and carve the straw as a thicker cutout line.
6. Light with an LED light so the boba dots twinkle like pearls.

97. “Pumpkin Pretzel” Twist Shape

A big pretzel twist silhouette—unexpected, cute, and perfect for fall snack lovers.

Supplies

• 1 large pumpkin
• 1 knife set
• 1 scraper tool
• 1 LED puck lights

Directions

1. Cut the lid, scoop out the pumpkin, and scrape thinner behind the pretzel area using a scraper tool.
2. Draw a classic pretzel twist (make the lines thick and rounded—thin pretzels can snap).
3. Carve the pretzel outline as one connected cutout shape.
4. Surface-carve a few “salt” dots on top for texture (little shallow circles look adorable).
5. If you want extra detail, surface-carve a faint inner outline to make it look puffier.
6. Light with LED puck lights so the pretzel glows bold and graphic.

98. “Little Bat Parade” Row of Tiny Bats

A whole row of mini bats flying across your pumpkin—simple, but it looks so good when lit.

Supplies

• 1 wide pumpkin
• 1 tools kit
• 1 pumpkin stencil book (optional)
• 1 LED string lights

Directions

1. Hollow the pumpkin and scrape thinner behind where the bats will fly.
2. Draw 8–12 tiny bat shapes across the pumpkin in a gentle wave pattern (vary the sizes for movement).
3. Carve each bat as a small cutout. Keep wing tips rounded and thicker for strength.
4. Space them so you don’t accidentally weaken one area with too many cutouts together.
5. If needed, use a small saw tool for tighter corners on the wings.
6. Light with LED string lights so the whole bat parade glows evenly.

99. “Jack-o’-Lantern Junior” Tiny Face + Big Cheeks

A very simple, super cute jack face with big round cheeks—perfect for kids to recognize instantly.

Supplies

• 1 medium pumpkin
• 1 knife set
• 1 detail tool
• 1 LED tea lights

Directions

1. Clean out the pumpkin and scrape thinner behind the face area so the cheeks glow bright.
2. Draw two round eyes, a small triangle nose, and a curved smile.
3. Add two big circles as cheeks on each side of the smile (this is what makes it extra cute).
4. Carve the eyes, nose, and mouth as cutouts.
5. For cheeks: either carve them as cutouts (brighter) or surface-carve them (softer blush look).
6. Light with LED tea lights for a classic friendly glow.

100. “Happy Haunt Banner” BOO with Hanging Stars

A bold “BOO” with little hanging star garlands—cute, festive, and a perfect final idea.

Supplies

• 1 large carving pumpkin
• 1 detail tools
• 1 poker tool
• 1 LED puck light

Directions

1. Hollow the pumpkin and scrape thinner behind the letters so “BOO” glows brightly.
2. Draw large, rounded bubble letters: B-O-O (rounded is cuter and easier to carve than sharp fonts).
3. Above the letters, draw a garland line with 5–7 hanging stars (like party decor).
4. Carve the “BOO” letters as cutouts. Keep inner letter islands thick so they don’t fall out.
5. Use a poker tool to poke tiny holes along the garland line, and carve the stars as small cutouts.
6. Light with an LED puck light so the banner looks like a glowing Halloween party sign.

FAQ

Is it safer to use a real candle or LED lights inside carved pumpkins?

LED pumpkin lights are the safest and easiest option, especially if kids are around. They’re bright, reusable, and you don’t have to worry about heat inside the pumpkin.

How do I keep my carved pumpkin from getting mushy too fast?

After carving, pat the inside dry and keep it cool when you can.

If you want to help it last longer, a quick wipe around cut edges and the inside can help slow drying.

Many people use a light coating of petroleum jelly on the carved edges to reduce dehydration.

What tools work best for detailed designs?

A pumpkin carving detail tool set makes a huge difference for thin lines, tiny faces, and surface carving.

A poker tool is also amazing for dotted stars, seeds, and “twinkle” effects.

How do I make my pumpkin glow brighter?

Scrape the pumpkin wall thinner behind the design (without breaking through) and use a brighter light like an LED puck light or battery LED string lights spread inside the pumpkin.

Can I carve pumpkins with kids?

Yes—just keep it age-appropriate. Let kids draw designs with washable markers and do poked designs using a poker tool (with supervision). Adults can handle the cutout carving.

Conclusion

Halloween pumpkin carving doesn’t have to be complicated to be adorable.

With a few basic tools, a bright LED light, and a cute theme (ghosts, candy, bats, and cozy fall icons), you can make pumpkins that look amazing in daylight and glow beautifully at night.

Pick a couple designs, mix in a few easy dotted details, and you’ll have a whole porch lineup that feels creative, festive, and totally family-friendly.

Get the scoop on more like this:

• 25 Easy Pumpkin Carving Ideas for Beginners
• 25 Cute Pumpkin Carving Ideas (Not Too Spooky)
• 25 Easy Halloween Crafts for Kids
• 50 Cute Halloween Crafts For Kids